News

News

News Center

Matters needing attention in the repair and maintenance of rice transplanter

Release time:

2023/07/13

During spot inspection, oil injection and repair, the transplanter shall be parked in a flat and stable place without traffic danger, and the engine shall be turned off.

Matters needing attention in the repair and maintenance of rice transplanter

1. The transplanter shall be parked in a flat and stable place without traffic danger during spot inspection, oil injection and repair, and the engine shall be turned off.

2. The lifting switch of the seedling loading platform is set to the "lowering stop" position to lock the brake.

3. When stopping, the main speed change handle should be placed in the "seedling filling" position.

4. When lifting the planting part for spot inspection and maintenance of the seedling claw, the lifting switch of the seedling loading platform shall be placed in the "lowering stop" position, and the planting part shall be supported by a bench to prevent falling.

5. When checking and adjusting the seedling claw, full attention should be paid to prevent injury due to the rotation of the seedling claw.

Note:

1. During spot inspection, oiling, maintenance and repair operations, people should not approach the rice transplanter, especially children. In a more hidden place or covered place, if you touch the machine will be very dangerous.

2. It is necessary to allow the muffler, engine and other overheated parts to fully cool down, and then check, fill oil, and maintain, otherwise it will be scalded.

3. Please install the cover removed for routine inspection and maintenance of the rice transplanter as it is. If the machine is operated with the cover removed, it may be involved in the machine and cause personal injury.

Key words:

Previous Page:

Use of Rice Plate Seedling Planter

None

: Next Page

Previous Page:

Use of Rice Plate Seedling Planter

Next page:

None

Visualized intelligent seedling raising: one-touch seedling raising saves 100 times of effort

The three eye-catching display boards of "digitization of vegetable factory, industrial seedling raising assembly line and intellectualization of agricultural machinery", together with the spacious product display, make Dahui Zhinong's booth stand out among all the enterprises. However, one of the exquisite and small factory seedling raising models is even more distinctive-this is a set of industrial seedling raising assembly lines. The whole process of visual control is designed. Only five model people are needed to control a whole set of assembly lines, making the whole seedling raising factory appear simple, smooth, efficient and full of scientific and technological sense.

2023-12-13

Cyclic Motion Seedling Raising Equipment Helps Seedling Raising Industry

Cyclic Motion Seedling Raising Equipment Helps Seedling Raising Industry

The circulating movement type seedling raising equipment is a brand-new agricultural production seedling raising equipment. It adopts integrated design and unique circulating movement and innovative design methods. It can automatically turn over the lighting and spraying, and the ambient temperature, humidity and light conditions can be automatically controlled. It is designed with centralized spraying, adding water and moisturizing, fertilizing and spraying disease prevention devices, giving full play to the three-dimensional space effect, saving farmland and land resources, saving labor and time, and reducing labor intensity, high space utilization and multi-functional use of seedling raising.

2023-12-05

Treatment Method of the Trapped Rice Transplanter

Treatment Method of the Trapped Rice Transplanter

When the transplanter is caught in the paddy field and needs to be pulled to get out of the transplanter, please tie the rope to the rope hook in front of the fuselage.

2023-12-04

Maintenance of rice tray seedling seeder

Maintenance of rice tray seedling seeder

When using the seeder, various faults will inevitably occur. When the motor does not drive, it is usually caused by the main switch not being turned on or forgetting to connect the power supply. Emergency treatment should be implemented according to this situation. Turn on the main switch of the machine or connect the 220v power supply to ensure the normal operation of the machine. If the water potential of the machine is weakened or the water is cut off, which may be caused by the solenoid valve stopping operation, the filter is blocked or the main switch is not turned on, the filter should be cleaned in time, the water spray valve should be opened or the solenoid valve should be overhauled to ensure the normal water spray of the planter and improve the working efficiency of the planter. When it is found that sundries are stuck in the separation needle, the seeding work should be stopped immediately, and the work should be started after the sundries are taken out by professionals. When the seeder implements the seeding work, if the seeding is uneven or the seeding is stopped, it is generally caused by factors such as unqualified young seeds, wet seeding drum, imbalance between brush and seeding shaft, etc. Therefore, targeted measures should be implemented, and the operator should remove the branches and stalks remaining on the rice seeds in time to ensure that the young seeds are clean. Or dry the drum, adjust the brush and lift the opening plate in the seed box to ensure the normal operation of the planter and improve the sowing efficiency and quality. In view of the unearthed uneven phenomenon, the bearing mounting bolts should be adjusted in time to ensure that the machine is unearthed evenly.

2023-10-18

Use of Rice Plate Seedling Planter

Use of Rice Plate Seedling Planter

Rice seedling seeder is very common in rice sowing work, and the mechanical sowing efficiency is high, which can effectively make up for the shortcomings of artificial sowing work, so as to improve the efficiency and effect of sowing, so it has been widely used.

2023-08-23

Sweep to learn more

Sweep to learn more

Yancheng Agric Machinery Co., LTD

18015815797

Company address: No. 988, Guangming Road, Economic and Technological Development Zone, Jianhu County, Yancheng City, Jiangsu Province, China
Mailbox:ybjx1314@163.com
Fax/Telephone:0515-86284808

Copyright©2023 Yancheng Agric Machinery Co., LTD(Changzhou Yuanbo Machinery Co.,LTD)

www.300.cn   | Label |    

Business License