News

News Center

Treatment Method of the Trapped Rice Transplanter


Release time:

2023/12/04

When the transplanter is caught in the paddy field and needs to be pulled to get out of the transplanter, please tie the rope to the rope hook in front of the fuselage.

Treatment Method of the Trapped Rice Transplanter

When the transplanter is caught in the paddy field and needs to be pulled to get out of the transplanter, please tie the rope to the rope hook in front of the fuselage.

Important: Remember not to tie the rope to the part other than the rope hook to pull the transplanter, otherwise it will cause the machine to deform and cause serious damage to the machine.


Preparation before towing

At the same time of tying the rope, prepare the agricultural machinery for traction. If the agricultural machinery cannot be used to pull out, it can also be pulled out by manpower.

Remove the load on the transplanter. (Remove all trays and other unnecessary loads on the seedling loading platform, the preparation seedling loading platform and the rack)


Precautions when towing

During the traction process, the transplanter shall keep the "forward" gear and move slowly.

Place differential lock pedal in LOCK position. (Do not turn the steering wheel after stepping on the differential lock pedal. If you turn the steering wheel, it may cause mechanical damage, etc.)

Ensure that the direction of agricultural machinery or human traction is consistent with the forward direction of the transplanter. (If forced skew traction, it will cause mechanical damage, etc.)

Key words:

Visualized intelligent seedling raising: one-touch seedling raising saves 100 times of effort

The three eye-catching display boards of "digitization of vegetable factory, industrial seedling raising assembly line and intellectualization of agricultural machinery", together with the spacious product display, make Dahui Zhinong's booth stand out among all the enterprises. However, one of the exquisite and small factory seedling raising models is even more distinctive-this is a set of industrial seedling raising assembly lines. The whole process of visual control is designed. Only five model people are needed to control a whole set of assembly lines, making the whole seedling raising factory appear simple, smooth, efficient and full of scientific and technological sense.

2023-12-13

Maintenance of rice tray seedling seeder

When using the seeder, various faults will inevitably occur. When the motor does not drive, it is usually caused by the main switch not being turned on or forgetting to connect the power supply. Emergency treatment should be implemented according to this situation. Turn on the main switch of the machine or connect the 220v power supply to ensure the normal operation of the machine. If the water potential of the machine is weakened or the water is cut off, which may be caused by the solenoid valve stopping operation, the filter is blocked or the main switch is not turned on, the filter should be cleaned in time, the water spray valve should be opened or the solenoid valve should be overhauled to ensure the normal water spray of the planter and improve the working efficiency of the planter. When it is found that sundries are stuck in the separation needle, the seeding work should be stopped immediately, and the work should be started after the sundries are taken out by professionals. When the seeder implements the seeding work, if the seeding is uneven or the seeding is stopped, it is generally caused by factors such as unqualified young seeds, wet seeding drum, imbalance between brush and seeding shaft, etc. Therefore, targeted measures should be implemented, and the operator should remove the branches and stalks remaining on the rice seeds in time to ensure that the young seeds are clean. Or dry the drum, adjust the brush and lift the opening plate in the seed box to ensure the normal operation of the planter and improve the sowing efficiency and quality. In view of the unearthed uneven phenomenon, the bearing mounting bolts should be adjusted in time to ensure that the machine is unearthed evenly.

2023-10-18


Copyright©2023 Yancheng Agric Machinery Co., LTD(Changzhou Yuanbo Machinery Co.,LTD)

www.300.cn   | Label |    

Business License